5-station edge banding machine MZ-365 s

📅 Content updated on: 12/05/1402

With the increasing advancement of wood and MDF industry technology, the machinery of this industry has also become more prominent. Among them, the edge banding machine or so-called PVC edge banding machine has also been updated. You are definitely familiar with this machine, but for those who have recently entered this industry and are wondering what an edge banding machine is? Or to find out the price of buying an edge banding machine, here we intend to tell them and you everything they need to know.

Features of the MZ-365 s 5-station edge banding machine

• With workpiece preheating
• Has an automatic meter reading system
• Has a sliding suction cup
• Ability to glue PVC strips from 0.04 to 3 mils thick
• Taping speed up to 12 meters per minute
• Has a polishing system

Introduction to PVC edge banding stations:

Preheating heater: In this station, the surface of the workpiece is heated so that better quality glue can be applied to the piece.

Pishferz Station: In order to prevent errors and chipping during cutting, the workpiece is cut at this station to an extent of about two millimeters.

Glue and press stationAfter the glue is melted and prepared in the tank with heat, it is placed on the edge of the work by a roller and pressed by several rollers at the pressure roller station.

The head and bottom of a woman: At this station, the beginning and end of the PVC edge strip are cut so that the PVC strip does not have extra edges.

Up and down milling: After the piece passes through the top and bottom cutting and trimming station, the top and bottom allowances of the strip are fully paid off at this station.

Woman's Corner Station: At this station, the beginning and end edges of the workpiece are slightly rounded or chamfered to eliminate the sharp top and bottom edges of the beginning and end of the workpiece and give the workpiece double beauty.

High school: Any glue left on the edges of the workpiece will be removed at this station. The edge of the workpiece will also be smoothed at this station, and it is a complement to the finishing milling.

Polishing: The polishing station is the last station of the workshop where the polishing brush rotates on the workpiece and cleans it. It also polishes the PVC strip by spraying liquid paraffin and makes it shiny, so that the workpiece is finally shown to be of very high quality.

5-station edge banding machine MZ-365 s