Konica 512 head – Konica 512

📅 به‌روزرسانی محتوا در: ۱۴۰۵/۰۲/۲۹

Konica 512 head enters the competitive market

The Konica 512 head entered the competition scene at the end of the decade. This head was 4 times more powerful than the ZAR 128 head and had higher print quality. In fact, it can be said that the power and ability of a Konica 512 head was as much as 4 ZAR 128 heads. Therefore, in such a situation, if a printing house wanted to have the same quality as the Konica 512 head, it would have to install 16 ZAR 128 heads on its machine. Which was not economical at all and cost a lot of money. That is why the Konica 512 head won the competition in this field.

Related content: Banner Printing Machine Buying Guide

What are the factors affecting the price of the Konica 512 head?

Konica 512 Akband head is priced according to the dollar rate and market inflation. In general, the profit of spare parts such as Konica 512 head is very small for the importer and for the supplying companies. In general, it can be said that the profit of such parts is below 5 percent.

Is it affordable to buy a second-hand Konica head?

In the case of the second-hand Konica 512 head, it can be said that the second-hand model of the Konica 512 head is one of the rarest parts of the banner printing machine. The probability that someone intends to sell their machine head alone is very low. Except in rare cases when a person wants to upgrade their machine head. This probability is much lower for the Konica 512 head because newer heads than the Konica 512, namely the 512i head or Konica 1024 head Mobile is expensive.

Assuming this heavy cost is accepted, many bodies on which the Konica 512 head is installed can be upgraded to Konica 512i head And they are not Konica 1024 heads.

So usually no one sells their healthy, flawless head.

Note: Be sure to test the head before buying. In today's market, if someone wants to sell a head, they keep their second-hand heads in solvent. The person claims that the head in question is flawless and promises to take the head back, which usually does not happen. If you are planning to buy a second-hand Konica 512 head, be sure to test the head before buying.

How many picoliters is your head?

First of all, it is good to know that the picoliter head actually refers to the nozzles of the head. In general, the smaller the picoliter size, the higher the final print quality of your device. However, the higher the picoliter head, the more difficult it is to maintain the head, and the head wears out faster. The price of the ink you use is much higher.

That's why the Konica 512 head below 42 picoliters is not very common. If someone wants to enjoy higher print quality, they use the Konica 512i head. Or they buy the Apson head.

Number of Konica head nozzles 512

In general, the Konica 512 Akband head has 512 active nozzles. But some of the nozzles may become clogged or some of the nozzles may burn during operation. Or for any other reason, the relevant nozzles may not have a proper output. In fact, the active nozzles mean the number of nozzles from which the color output occurs and spraying is performed.

If you are also curious to identify the active nozzles of your device, just go to the device software. Then click the nozzle check option. At this time, the device carriage starts moving and prints a line, and based on this simple print, you can identify the number of active nozzles of the device.

Be sure to read the following articles that we recommend:

• Banner printing machine head repair
• Introduction to Epson DX5 head
• Konica 512i head
• Buying a second-hand banner printing machine